Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
If the hard hat meets Z89.1-2009, it ,must, also contain the following as required: Two arrows curving to form a circle when the ,helmet, can be worn forwards or backwards; LT – When the ,helmet, is designed to provide protection at low temperatures 22 °F (-30 °C). HV – When the ,helmet, …
Health and ,safety, law does not directly require bump caps in certain areas in the same way it does ,safety helmets,. However, if your manager has ordered you to ,wear, a bump cap as a preventive measure to reduce the risk of injury in the course of your work, you ,must wear, …
Safe Work Australia does not provide legal advice on the operation of the model Work Health and ,Safety, laws. You ,must, contact your work health and ,safety, authority in your state or territory. PPE is one of the least effective ,safety, control measures: you should not rely on PPE as a hazard control.
The Occupational ,Safety, and Health Administration ... 29 CFR 1910.135(a)(1) states, "Each affected ,employee, shall ,wear, protective ,helmets, when working in areas where there is a potential for injury to the ... ,Helmet, accessory or component suppliers ,must, provide justification upon request that their product would not cause the ,helmet, to fail the ...
Can ,employees wear safety helmets, together with the full-face respirators? When other Personal Protective Equipments (PPE) such as ,safety helmets,, eye protectors, hearing protectors or protective clothing are used, care should be taken to ensure that the …
Employees must wear, their ,safety helmets, properly and follow the instructions of their employer or, in other cases, the rules made by the person in control of the site. They should take care of their ,helmets, and not misuse them. Any defects or problems should be reported promptly.
The Occupational ,Safety, and Health Administration requires ,employees, to ,wear safety, hard hats when there’s any potential for head injury. Whether it’s from possible impact, from falling or flying objects, or from electrical shocks or burns, employers ,must, provide ,safety, hats for ,employees, who face head-related dangers in the workplace.
Every job in the workplace ,must, be evaluated. The employer ,must, certify in writing that the PPE hazard assessment has been performed.” You also need to comply with OSHA’s head protection rule at 29 CFR 1910.135: “Employers ,must, require ,employees, to ,wear, a protective ,helmet, in areas where they are at risk of falling objects injuring the head.
Each affected ,employee, shall ,wear, protective ,helmets, when working in areas where there is a potential for injury to the head from ... ,Helmets must, comply with the performance guidelines in the ANSI Z89.1-1986, ... Page 2 of 3 ,Safety, Instruction # 87 – rev. 07/2010
Safety Helmet, Requirements: Both standards require workers to ,wear safety helmets, if they are at risk of being struck by falling objects, bumping their heads on fixed objects, or coming in contact with electrical hazards. OSHA requires selection criteria for head protection that ,must, comply with ANSI/ISEA Z89.1.